TDS / Surface BCS1 Pipeline Set (delivery: 6 weeks)

• For TDS systems with probe in pipeline • Complete pipeline kit - choice of controller 

• Suitable for boiler pressures of 14 bar g • For blowdown rates up to 590 kg/h

The BCS1 pipeline set is a kit of components selected to enable
straightforward installation of a TDS control system where the probe
assembly is to be mounted in the pipeline, rather than directly in the
boiler shell.
 

BTS7, BTM7 Clean steam Trap, 316L, ¼", ½", ¾", 1" screwed /butt weld / Sanitary Clamp (BTM7, 1/2" clamp Stock)

 BTS7, BTM7  Clean steam Trap, 316L, ¼", ½", ¾", 1" screwed /butt weld / Sanitary Clamp

The Spirax Sarco BTS7 is a sealed thermostatic steam trap designed to remove condensate from clean steam systems with minimal backing up. Applications include sterile steam barriers, process vessels and CIP/SIP systems. Manufactured in 316L stainless steel with minimal crevises, it is self-draining and operates close to steam temperature. Traps are individually packaged with protective end caps and sealed in a polythene bag.

The Spirax Sarco BTM7 is a maintainable thermostatic steam trap designed to remove condensate from clean steam systems with minimal backing up. Applications include sterile steam barriers, process vessels and CIP/SIP systems. Manufactured in 316L stainless steel with minimal crevises and a typical internal surface finish of 1.6 - 3.2 µm Ra, it is self-draining and operates close to steam temperature. Traps are individually packaged within an "ISO CLASS 7" clean environment with protective end caps and sealed in a protective plastic bag

200 Series Cast Iron Inverted Bucket Steam Traps; ½" - 2" screwed / Flanged (delivery: 6 weeks)

The Spirax Sarco 200 Series of inverted bucket steam traps are designed for installation in vertical pipework. With cast iron bodies and bolted cover they are maintainable and offer a very wide range of capacities, in applications up to 17 bar g.

25P Pressure Reducing Valve, ½" To 6"; Cast Iron/Cast Steel Body, Screwed/Flanged (Delivery: 6 Weeks)

The 25P is a self-actuated pilot-operated pressure regulator. Downstream pressure is fed back through an external sensing line to the pressure pilot, which adjusts the opening of the main valve so as to maintain the set pressure. The main valve can close tight for ANSI/FCI 70-2 Class IV shut off when steam is not required.

 Sizes: ½" to 6"

 Connections: Screwed / Flanged
 Construction: Cast Iron, Cast Steel
 

Typical Applications:
The 25P is a reliable, accurate regulator to reduce steam from a high supply pressure to the most efficient operating pressure of the equipment, and to protect the equipment from dangerously high pressures.

25PT Combination Pressure/Temperature Regulator; 1/2" to 4", Screwed/Flanged (delivery: 6 weeks)

25PT Combination Pressure/Temperature Regulator; 1/2" to 4"

The 25PT eliminates the need for a separate pressure regulator and a temperature regulator. Normal operation is controlled by the temperature pilot, and the pressure 
pilot sets an upper limit on the downstream steam pressure. The temperature pilot has a calibrated dial for accurate temperature setting, and is available with a variety of solid-fill sensing bulbs.  The standard capillary tubing length is 8 feet, with an optional standard length of 15 feet

 Sizes: 1/2" to  4"

 Connections: Screwed/Flanged

 Non-Standard capillary tubing length 

Typical Applications: Storage steam water heaters, instantaneous heat exchangers and converters, air handling coils, tank heating coils, steam jacketed vessels, steam chests, 
molds and platens, and other temperature control applications where it is necessary or desirable to set an upper limit on the delivered steam pressure.
 

37D And 37DE Pilot Operated Temperature Control Valve- 1/2" To 2", Screwed/Flanged (Delivery: 6 Weeks)

Temperature Control Valve; Pilot Operated; 37D and 37DE; 1/2" to 2"; Screwed / Flanged; 2 m of capillary tube as standard (other lengths are available on request)

Absolute pressure gauges, Diaphragm type; NS 100 - 150; 25 mbar to 2,5 bar abs. (Stock)

Diaphragms absolute pressure gauges

• watertight casing;
• NS 100 - 150;
• ranges included between 25 mbar and 2,5 bar abs.

The absolute pressure gauges are employed for those applications that require to measure the pressure without depending from the fluctuations of the atmospheric pressure. This function is carried on with an vacuum chamber used as a reference.

Accessories for pressure gauges; valve manifold, Syphons, ADJUSTABLE SCREW DAMPER, ADJUSTING OVER-PRESSURE PROTECTOR (delivery: 6 weeks)

Accessories for pressure gauges; valve manifold, Syphons, ADJUSTABLE SCREW DAMPER, ADJUSTING OVER-PRESSURE PROTECTOR (delivery: 6 weeks) 

Automatic Control System; HELIOS.05 (delivery: 6 weeks)

● DIGITAL PANEL SUPPLIED WITH:
● ANALOGIC MULTIFUNCTION DOSING PUMPS (ATHENA.AMSERIES)

● MULTIPARAMETER SWITCH BOARD (NEXUS.7000SERIES)

● pH PROBE, CHLORINE PROBE WITH REGULABLE FLOW SENSOR, SAMPLE 
WATER FAUCET, DEGASSING FILTER

● PVC PANEL 40x60 cm  ● BUFFER SOLUTION (pH-REDOX)

● ALL ASSEMBLED AND CABLED READY TO BE INSTALLED

● AVAILABLE POTENTIOSTATIC CHLORINE VERSION

Automatic Pump Traps; APT14, APT14HC and APT14SHC (Stock)

APT14 SG iron: Flanged DN40 inlet x DN25 outlet, Screwed 1½" inlet x 1" outlet

APT14HC SG iron: Flanged DN50 inlet x DN40 outlet

APT14SHC Carbon steel: Flanged DN50 inlet x DN40 outlet

The Spirax Sarco APT14, APT14HC and APT14SHC automatic pump traps are flanged or screwed displacement receivers pressure rated to PN16. The units are capable of automatically trapping or pumping, depending on pipeline conditions. The unit is operated by steam and is used to remove condensate from process plant under all operating conditions including vacuum.

Automatic Pump-trap Packaged Units (Closed System); APT10-PPU, APT14-PPU and APT14HC-PPU (delivery: 6 weeks)

Unit size: DN20 x DN20 (¾" x ¾"), DN40 x DN25 (1½" x 1"), DN50 x DN40 (2" x 1½").

The Spirax Sarco APT10-PPU, APT14-PPU and APT14HC-PPU automatic pump-trap packaged units are plug in systems specifically designed to remove condensate from plant under 'stall' conditions. The whole system is capable of handling capacities up to 2 800 kg / h pumping and 9 000 kg / h trapping, depending on available differential pressure.
Each unit comes with a condensate receiver, motive supply drain trap and ancillaries.
Operated by steam the APT10, APT14 and APT14HC-PPU's meet a wide range of applications. The standard pump-trap is manufactured from SG iron, although electroless nickel plated (ENP) versions are available on request

Automatic Pumps; MFP14, MFP14S and MFP14SS (Stock)

The Spirax Sarco MFP14 automatic pump is a displacement receiver operated by steam or compressed air. It is generally used to lift liquids such as condensate to a higher level. Subject to the conditions being suitable, the pump can also be used to directly drain closed vessels under vacuum or pressure. In conjunction with a float steam trap the pump can be used to effectively drain temperature controlled heat exchangers under all operating conditions.

Available types The MFP14 is available with the following body materials: SG iron MFP14, Cast steel MFP14S, Stainless steel MFP14SS.